Plaster of 1:4 Cement : sand Volume proportion Volume of 1 Bag of Cement 50 kg = 36 litre or 0.036 cum cement loose density as 1440 kgs/cum Volume of Sand required using 1:4 proportion = 0.036 x 4 = 0.144 x 1600 = 230 kgs considering sand dry bulk density as 1600 kgs/cum.
Sand used for plaster work can be natural sand, crushed stone sand or crushed gravel sand. The grading limit of sand for plaster work; for internal and external wall and ceiling should be as given in the table below. Grading Limit of Sand for Plaster Work IS Sieve Size Percentage Passing 10 mm 100 4.75 …
Gravel, with sand: 120 lb/ft 3: 1,920 kg/m 3: 3/8 inch Gypsum or Plaster Board: 1.56 lb/ft 2: 7.62 kg/m 2: 1/2 inch Gypsum or Plaster Board: 2.08 lb/ft 2: 10.2 kg/m 2: 5/8 inch Gypsum or Plaster Board: 2.60 lb/ft 2: 12.7 kg/m 2: Ice, crushed: 37.0 lb/ft 3: 593 kg/m 3: Ice, solid: 57.4 lb/ft 3: 919 kg/m 3: Limestone: 171 lb/ft 3: 2,739 kg/m 3 ...
The specific gravity is 2.63 for M-sand and 2.67 for river sand. Bulk density of M-sand and river sand are 15.1 and 14.5 KN/m3 respectively. Bulk density of M-sand is marginally higher than that of river sand. The pH of M-sand and river sand is 10.11 and 8.66 respectively.
a Specific gravity of sand determined with IS 2386 Part 3 : 1963 ; and b Bulk density determined in accordance with IS 2386 Part 3 : 1963 1. 7.3 If possible, information on the bulking of the sand with varying moisture content may be furnished in the form of a graph. 2
Cement Mortar Ratio for wall plastering 1:6; Cement Mortar Ratio for ceiling plastering 1:4; Plastering thickness should not be more than 12-15 mm. If there is a need for an additional coat don’t do that at one go. Ensure you are using good quality of cement and Sand In silt content test, we have discussed how bad sand quality affects the work
Manufacturer of River Sand - River Sand for Plastering Work offered by AK Enterprises, Chennai, Tamil Nadu.
density units converter; Note - be aware that for many of the products listed below there is a difference between "bulk density" and actual "solid or material density". This may not be clear in the description of the products.